What is a blown speaker? What should I do if my speakers blow?

A Common Question about speakers is What is a blown speaker ..? Well A blown speaker is a common problem that affects almost every home audio system. The sound quality of a speaker is determined by its cone or diaphragm. When the cone gets damaged, the sound becomes distorted. If you notice that your speakers are blowing, check out these tips to fix them.

How can I tell if my speakers are blown?

When you blow your speakers, you’ll hear a loud crackling noise. This sounds like popcorn popping because it is popcorn. You can also feel a vibration from your speaker’s coils when they’re being pushed too hard. To test whether your speakers are blown, follow these steps:

  1. Turn off all power and unplug the AC adapter.
  2. Remove the speaker’s cover so you can see inside.
  3. Check for any signs of damage, such as cracks in the cone or other parts of the speaker itself.

If you find damage, replace the speaker immediately! It could be expensive to repair a blown speaker.

What causes a speaker to blown?

There are many reasons why speakers may blow. A broken wire or lose connection at the back of the speaker can cause this issue. An over-powered amplifier or subwoofer can also stress the speaker, causing it to blow. If a hole in the cone or a crack on the driver, the air pressure will force the material apart. If the speaker has been dropped heavily, the cone may have cracked. In some cases, a high volume of wind or water can get into the speaker and make it blow.

What is a blown speaker

Why don’t speakers blow more often?

Speakers usually last longer than we expect them to. Most people who buy new speakers only need to change their old ones once every five years. However, if you’ve noticed that your speakers are blowing after just one year, then you probably need to switch them sooner.

Read Also What are Mid Bass Speakers

What should I do if my speaker blows?

If you notice that your speakers blow, try the following solutions.

1) Use a vacuum cleaner to suck up any dust particles that might be stuck in the cone. Make sure to take the speaker entirely apart to clean the cones. Vacuum cleaners with flexible attachments work best.

2) Try using compressed air instead of an electric drill or screwdriver to remove the screws holding the speaker together.

3) Replace the speaker with another one.

4) Clean the entire speaker with alcohol wipes. Don’t use acetone or nail polish remover because those chemicals can ruin the plastic. Be careful not to spill anything on the speaker, as this can short circuit the speaker.

5) Blow dryer: Blowing hot air on the speaker helps loosen the glue that holds the speaker together.

6) Spray deodorizer on the speaker.

7) Put the speaker in a bag and shake it vigorously.

8) Cut a piece of paper towel, cut it down to fit between the speaker and the wall, place the speaker on top of the paper towel, and tape the speaker in place. Leave the speaker in this position overnight.

9) Wrap the speaker in an electric blanket overnight.

10) Take out the speaker and put it in a freezer overnight. The cold temperature will help loosen the glue.

11) Use a hairdryer to blow warm air on the speaker.

12) Change the woofers and tweeters.

13) Keep the speaker away from heat sources.

What is a blown speaker

You Might be interested in What are Speaker Baffles

How to fix a blown speaker

To keep your speakers working well, here are some tips on how to care for them properly.

1) Never leave a speaker plugged in while unattended. When a speaker is plugged in but turned off, the magnet coil will stay energized and build up static electricity. This can eventually lead to a short circuit in the speaker. To prevent this, turn off all connected devices before moving the speaker.

2) Do not store speakers near carpets. Carpets absorb moisture, which can damage speaker parts.

3) Always move a speaker when removing it from its box or case. Any vibration can loosen the adhesive used to hold the speaker together.

4) Avoid putting a speaker near other electronic equipment. Poorly grounded electronics can trigger electrostatic discharge (ESD). ESD can destroy sensitive components inside the speaker.

5) Turn off power to speakers when not in use. Leaving speakers powered on can cause a buildup of positive charge in the magnetic coils, eventually leading to a short-circuit. If you plan to unplug a speaker, first unplug everything else.

6) Remove the speaker’s faceplate when replacing it. A loose faceplate can allow water to enter the speaker.

7) Store speakers upright. Keep the speaker pointed towards the ground so gravity can force any moisture toward the bottom of the speaker.

8) Clean the speaker regularly. Dust and dirt collect around the magnetic coils and negatively affect sound quality. Cleaning the speaker is easy. First, spray the speaker with a small amount of canned air. Then wipe the speaker with a soft cloth dampened with rubbing alcohol. Ensure the speaker has dried completely before placing it back into its case.

9) Replace audio cables every two years. Audio cables deteriorate over time due to their high-stress levels during regular operation. Replacing old cables can improve sound quality.

10) Perform maintenance checks at least once each year. Checking the speaker’s volume control, tone controls, and equalization settings can make a big difference in the speaker’s sound quality.

What is a blown speaker

Why Does My Speaker Have Bad Sound?

The most common reason for this is that the speaker has been damaged or has a problem with its wiring. If you’ve checked all of these things and it still sounds bad, then it’s time to replace the speaker. If your speakers look new, then chances are they’re working just fine. They may need new wires through.

Conclusion 

If the speaker looks good, has no apparent problems, and plays music without distortion, then it’s probably working great. However, if the speaker is playing poorly or distorting, it needs to be repaired. This article should have given you enough information to figure out whether or not your speaker needs repair. Good luck!

What is a blown speaker

FAQ’S 

Q: Why do my speakers have bad sound?

A: The most common reason for this problem is that the speaker has had physical damage. For example, a broken wire could cause an intermittent connection between the amplifier and speaker. More likely, however, is that the speaker has become worn out over time. As long as the speaker itself looks okay, it might only require replacement. If there is a noticeable crack in the speaker’s housing, it’s worth repairing.

Q: How much does a speaker cost?

A: Speakers usually cost less than $100. The price will depend on the brand and features. You can find speakers online for under $20. It depends on how well you want your speakers to perform.

Q: What type of speaker do I need?

A: There are many different types of speakers, but generally speaking, you’ll want to get something that fits within your budget. At the cheapest end of the spectrum, you can buy cheap speakers from Walmart for around $5-10. These speakers don’t provide very good sound quality, but they’re perfect for beginners who want to build their system.

Speaker Tips & Tricks

1) Get the right size speakers

2) Use a power conditioner

3) Mount the speaker properly

4) Know the basics about speakers

5) Install the correct wattage

6) Find the best place for your speakers

7) Learn more about speakers here

Q: How do I know which speaker to use?

A: The easiest way to choose a speaker is by looking at the wattage rating. Typically, the higher the number, the better the sound quality. Another factor to consider is the frequency range of the speaker. Look for one that covers a large amount of frequencies. Most speakers cover frequencies below 1000 Hz. Some speakers even go up to 30 kHz. Make sure that the speaker covers the bass frequencies too. If not, you may notice a lack of low notes.

Q: Where should I mount my speakers?

A: The ideal location for speakers is near the center of the room. This allows them to produce the maximum volume possible. In addition, positioning speakers near walls and corners makes them harder to hear.

Q: Can I put speakers anywhere else?

A: No, ideally, you should position speakers near the center of the area where you plan to play music. That means placing them next to the listening zone (where people sit). Other areas such as a kitchen or bathroom are fine, but make sure they aren’t directly behind your speakers.

Q: Do I need an amp with my speakers?

Amping isn’t required unless you want to amplify your audio beyond its current capabilities. Many inexpensive amplifiers won’t improve the performance of the speakers themselves. They add noise to the mix. A high-quality preamp/amplifier will allow you to turn down the volume on your source device if necessary. However, you can also plug headphones into your computer or other devices to listen without additional equipment.