Most people who own an amplifier of some sort, whether it’s for their car or home, have experienced at one time or another not being able to find the remote wire. This can be pretty frustrating if you don’t know how to turn on your amp without a remote wire. Today, I will show you ways How to turn on amp without remote wire! So whether you’ve misplaced your remote wire or don’t have one installed in the first place, read on for some helpful tips.
1st Method: Amp Fuse
The first thing to do is locate the amp fuse. This is usually found on the vehicle’s same side as the amplifier itself, under the dash, or in the engine compartment. Once you’ve uncovered it, pull it out and wait a few seconds before inserting it back into its slot.
The car’s electrical system will turn off and reset itself, giving you a fresh slate. Now, go ahead and try to turn on the amplifier again. In most cases, it should work just fine!
If that trick doesn’t get the job done, try this one. The key to this step is working quickly, so you don’t drain your car battery. This Method overrides the amp’s security system by forcing it to accept a new power source.
For this hack, you’ll need to locate an auxiliary power point, cigarette lighter, or fuse box in your car. Once found, attach one end of a wire to the positive terminal of the power source and the other end to the remote wire input on your amplifier.
Now, start your car and turn up the volume on your amplifier. As soon as you hear sound coming from the speakers, quickly turn off your vehicle. The sudden surge in power will trick the amplifier into thinking it’s receiving a signal from your head unit and enable the amplifier to turn on.
If you don’t have a cigarette lighter in your particular vehicle, you can always use an on/off switch to turn on your amplifier. It is a good solution if you want to control when your amplifier is on and off.
To do this, purchase an on/off switch from your local electronics store and connect it between the positive and negative terminals of the power source. Now, you can quickly turn on your amplifier by flicking a switch.
4th Method: Power antenna wire
Many amps have an automatic on/off feature that turns the amplifier on whenever the head unit is turned on. This can be very handy if you don’t want to worry about turning your amplifier on and off manually.
To enable this feature, locate the remote wire input on your amplifier and connect it to your head unit’s speaker wires power antenna wire. To do this, cut the insulation on these wires and run them together. They’re located in the same harness, usually right next to each other.
Also Read How to make car speakers louder
Once you’ve fused your power antenna wire with the amplifier’s remote input, all you have to do is turn your head unit on, and the amplifier will turn on, too, giving you full sound.
Give these tips a try the next time you’re having trouble turning on your amplifier. In most cases, one of these methods should do the trick!
If none of those methods work, you may have a defective amplifier or another issue preventing it from receiving power. In that case, I would recommend contacting an amplifier repair shop for a complete diagnosis. Good luck!
Now after reading my article. You know how to turn on your amp without a remote wire. Try one of the methods I’ve outlined, and you should be up and running in no time!
Q: What if neither of the methods I’ve tried works?
A: If neither of the methods outlined in this article work, then you may have a defective amplifier, your amp is not working correctly or another issue that’s preventing it from receiving power. In that case, I would recommend contacting an amp repair shop for a complete diagnosis.
Q: Can I use this Method to turn on my amp if I don’t have a remote turn on wire installed?
A: Yes, you can use either of the methods in this article to turn on your amp if you don’t have a remote wire installed.
Q: What should I do if my amp fuse keeps blowing?
A: If your amp fuse keeps blowing, then there’s probably something wrong with the wiring or installation of your amplifier. I would recommend contacting an amplifier repair shop for a complete diagnosis.
Q: What should I do if my amp starts making weird noises?
A: If your amplifier starts making weird noises, then there’s probably something wrong with it, and it needs to be serviced. I would recommend contacting an amplifier repair shop for a complete diagnosis.
Q: Can I use an on/off switch to turn my amp off and on as well?
A: No, you can only use an on/off switch to your amplifier turn on, not off. If you want an amp that’s both on and off at the flip of a button, I would recommend purchasing a dedicated amp turn-on switch. These can be found at most electronics stores.
Q: What should I do if my amp doesn’t have an automatic on/off feature?
A: If your amp doesn’t have an automatic on/off feature, you can use an on/off switch to turn it on and off. Purchase an on/off switch from your local electronics store and connect it between the positive and negative terminals of the power source. Now, you can quickly turn on your amp by flicking a switch.
Q: Can I use this Method to turn on an amp if I only have a remote wire for my subwoofer?
A: Yes, you can use either of the methods in this article to turn on your amp if you only have a remote wire for your subwoofer.
Q: What should I do if I’m having trouble finding the remote wire on my amp?
A: If you’re having trouble finding the remote wire on your amp, I recommend making sure it’s installed correctly. Check your owner’s manual for more information on where the remote wire should be connected. You may even want to consult with an amp technician to ensure everything is set up correctly. Good luck!